IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User's Manual 26-21
2 USB Autorun Function
26
External Memory Devices
2 Press the command to execute.
The command executes.
3 When the command finishes executing, a screen appears indicating the execution result.
Press Ack to close the execution result screen and display the menu screen.
Change Program
Copy Program
Run All Cancel
Confirmation
Press the button.
Touching Run All causes all commands defined in the USB Autorun definition file (hgauto.ini) to execute
one by one.
• If security is enabled in the Touch project, the Password Screen is displayed. Select the user name and
enter the password.
For details, refer to “2.4 USB Autorun Function Security” on page 26-26.
• Do not remove the USB flash drive while command is executing.
Change ProgramFunction
The following function completed
Ack
Result
If a command executes with a button (except the Run All), the menu screen is displayed after touching
Ack on the execution result screen.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English