IDEC SmartAXIS Touch FT1A Series

SmartAXIS Touch User's Manual 29-27
1 Touch
29
SmartAXIS Specifications
● Adjusting the Brightness and Contrast
The brightness and contrast of the Touch display can be adjusted on the Adjust Brightness/Contrast Screen. Adjust
the brightness and contrast to the best condition as required.
1 Press the Brightness (color LCD models) or Brightness/Contrast (monochrome LCD models) on the Maintenance
Screen.
The Adjust Brightness/Contrast Screen appears.
2 Press and at the bottom the Adjust Brightness/Contrast Screen to adjust the contrast to the optimal
setting.
3 Press to close the Adjust Brightness/Contrast Screen.
To adjust the brightness and contrast in the System Mode, use and located at the bottom of the Top
Page.
Color LCD models Monochrome LCD models
Color LCD models Monochrome LCD models
Top Page (Color LCD models) Top Page (Monochrome LCD models)
,3$GG'+&3
-8/)5,
6<67(002'(7233$*(
%5,*+71(66
5XQ 0DLQ0HQX
,3$GG'+&3
-8/)5,
6<67(002'(7233$*(
&2175$67
%5,*+71(66
5XQ 0DLQ0HQX
Since contrast adjustment is not possible on color LCD models, the contrast adjust function is not displayed.