IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual A-25
8 USB Driver
Appendix
● Windows XP
Follow these steps to install the USB driver.
1 Connect the USB cable to the USB interface on the Touch (with power supplied) and the USB port on the computer
(computer should be on).
A message Found New Hardware appears, followed by the Found New Hardware Wizard.
2 Select No, not this time, and then click Next.
3 Select Install the software automatically (Recommended), and then click Next.
The Hardware Installation dialog box is displayed.
Touch
Computer
USB cable
A plug Mini-B plug
To USB port To USB interface

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English