IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User's Manual 2-15
1 WindO/I-NV3 Specifications
2
WindO/I-NV3 Basic Operations
To select a font in the Properties dialog box
Select Windows for Font on the Properties dialog box for the Text from the Drawings or Parts.
The Font property may appear in different locations depending on the part. This table shows where to find this
property:
●
Character Code Table
Using the Character Code Table
Example: Finding the character code for the character “a” in the table.
The upper four bits of the code are hexadecimal 6.
The lower four bits of the code are hexadecimal 1.
Therefore, the character code for "a" is as follows.
Applicable
Drawings
Text
Applicable
Parts
Buttons Bit Button, Word Button, Goto Screen Button, Key Button, Keypad
Lamps Pilot Lamp, Multi-State Lamp
Part Location
Text Properties of Text dialog box
Bit Button, Word Button, Goto Screen Button, Key Button, Pilot Lamp, Multi-
State Lamp
Registration Text tab
Keypad Properties of Keypad dialog box
Upper 4 bits of the code (hexadecimal)
Lower 4 bits of the code (hexadecimal)
Upper 4 bits
Lower 4 bits
"a": 61
For other fonts and two-byte characters, refer to the table of the relevant code system.
Japanese (two-byte characters): JIS first standard/second standard, Chinese: GB2312, Taiwanese: BIG5,
Korean (Hangul character): KSC5601

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English