IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual 9-73
5 Message Switching Display
9
Data Displays
■ Trigger Device
Specifies the word device to use as the condition for switching messages.
Click to display the Device Address Settings dialog box. For the device address configuration procedure, refer to
Chapter 2 “5.1 Device Address Settings” on page 2-62.
Value: Switches the message to display according to the value of device.
Example: When Value is selected and the value of Trigger Device D0 are allocated to the following
messages.
Switches the message to display according to the value of device.
0 :
1 :
2 :
Trigger Device D0 value Msg0
Drying
Heating
Cooling
Msg1
Msg2
Message details
0
Message to display
1 2
3
Display Msg0
Action
Display Msg1
Display Msg2
No message
Msg0 Msg1 Msg2
Trigger Device D0 value
Drying Heating Cooling
If the value of device has no message
associated with it, display nothing.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English