IDEC SmartAXIS Touch FT1A Series User Manual

5 Message Switching Display
9-78 SmartAXIS Touch User’s Manual
● Format Tab
■ Font
Selects the font for displaying text from the following.
Japanese, European, Chinese, Taiwanese, Korean, Central European, Baltic, Cyrillic
The characters that can be displayed depend on the font. For details, refer to Chapter 2 “1.3 Available Text” on page
2-6.
■ Style
Selects Regular or Bold for text style.
■ Magnification
■ Align Text Horizontal
Selects the text alignment in the horizontal direction from the following.
Left, Center, Right
For details, refer to Appendix “5 Text Alignment” on page A-5.
■ Align Text Vertical
Selects the text alignment in the vertical direction from the following.
Top, Center, Bottom, Center-Top
Set to Center when the Vertical Writing check box is selected.
For details, refer to Appendix “5 Text Alignment” on page A-5.
W, H: Selects text magnification (0.5, 1 to 8).

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English