IDEC SmartAXIS Touch FT1A Series User Manual

SmartAXIS Touch User’s Manual 9-79
5 Message Switching Display
9
Data Displays
■ Vertical Writing
Select this check box when displaying text vertically.
■ Text Color
Selects the color of displayed text (color: 256 colors, monochrome: 8 shades).
Click the Color button to display the Color Palette. Select a color from the Color Palette.
■ Scroll
*1
Select this check box to enable scrolling display displaying of messages.
*1 Advanced mode only
When the Vertical Writing check box is selected, take care about the following points. This is applicable
for Windows supports East Asian characters.
• When there is a mixture of double-byte and single-byte characters, the half-width characters are left-
aligned.
• Dashes are displayed horizontally. Symbols representing voiced and semi-voiced sounds of single-byte
characters are shown as follows.
Aligned to
left edge
Horizontal
display
Next
characters
Speed (1: Fastest): Sets the scrolling speed (1 to 10). 1 is fastest, 10 is slowest.
When the Scroll check box is selected operation is follows.
• Messages that include CRs are displayed without the CRs.
• Messages scroll in the direction in which the text is drawn.
• When the message is switched, the message is scrolled from the beginning.
When the Scroll check box is selected, take care about the following points.
• The number of parts that can be arranged on a single screen decreases. If the Touch displays an error
message, clear the Scroll check box, or reduce the number of parts on the screen.
• When the scan time of the Touch is long, scrolling speed may become slow.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English