IDEC SmartAXIS Touch FT1A Series User Manual

3 Alarm Log Settings Dialog Box
13-20 SmartAXIS Touch User’s Manual
● External Memory Tab
The External Memory tab is used to configure whether or not to output saved data to the external memory.
The output data is stored in the following folder on the external memory.
\External memory folder\ALARMLOG
The default External Memory Folder name is “HGDATA01”. For details, refer to Chapter 26 “1.5 Setting the External
Memory Folder” on page 26-12.
Sampled data after starting output to the external memory is not included in the output data.

IDEC SmartAXIS Touch FT1A Series Specifications

General

Brand	IDEC
Model	SmartAXIS Touch FT1A Series
Category	Controller
Language	English