3 Data Log Settings Dialog Box
14-22 SmartAXIS Touch User’s Manual
● Options Tab
The Options tab only appears in Advanced mode. To switch to Advanced mode, click Advanced on the Data Log
Settings dialog box.
To display the data saved in the data storage area as numerical values on the Touch, copy this data to the specified
internal device.
■ Copy Data Log Data
Select this check box to copy data to a device.
Destination Device: Specifies the destination device for copied data. You can only specify an internal device.
For the device address configuration procedure, refer to Chapter 2 “5.1 Device Address
Settings” on page 2-62.
To Next Page
Loading...
