2 Security Function Configuration Procedure
21-26 SmartAXIS Touch User’s Manual
● Protecting the Operation of Parts
Here you will configure the security group for a part to protect the operation of that part.
This section describes an example where the operation of the Numerical Input is protected.
Configuration Procedure
1 Following the procedure in “Creating a User Account” on page 21-8, create the following user account.
2 Create a Numerical Input and configure the input security group.
On the Home tab, in the Parts group, click Data Displays, and then click Numerical Input.
3 Click a point on the edit screen where you want to place the Numerical Input.
4 Double-click the dropped Numerical Input and the Properties dialog box is displayed.
Goto Screen Button
(Open Password Screen)
User2
No user
999999
999
TouchTouch
Numerical Input
Can be operated
Numerical Input
Cannot be
operated
The keypad is not displayed,
nothing can be operated.
To change the user account, a button or command is required to open the Password screen.
User Name
Security Group GroupA
To Next Page
Loading...
