5. How to use the telephone/FAX
5-32
Dial-up procedure for number display and non-display
In this menu, user sets whether notifying or not-notifying their number to the recipient by just adding
1+ or 2+ on the head of dialing sequence.
This is a temporary setting, and available for only transmission.
Table 5.2.1c. Dial-up procedure for number display and non-display
The contents of above-mentioned table are the same as the one of the fourth page of this chapter, table 5c.
Displaying number
■ Regular calling 1 00 Country Code Area Code Subscriber’s number
■ Speed Dialing 1 Speed Dialing number
■ Redial calling 1 00
■ Regular calling with forced service type of Voice (4kbps Voice)
1 00 Country Code Area Code Subscriber’s number
■ Secret Code calling Secret Code 1 00 Country Code Area Code Subscriber’s number
■ Secret Code calling with forced service type of FAX (3.1kHz Audio FAX)
Secret Code 1 00 Country Code Area Code Subscriber’s number
Not displaying number
■ Regular calling 2 00 Country Code Area Code Subscriber’s number
■ Speed Dialing 2 Speed Dialing number
■ Redial calling 2 00
■ Regular calling with forced service type of Voice (4kbps Voice)
2 00 Country Code Area Code Subscriber’s number
■ Secret Code calling Secret Code 2 00 Country Code Area Code Subscriber’s number
■ Secret Code calling with forced service type of FAX (3.1kHz Audio FAX)
Secret Code 2 00 Country Code Area Code Subscriber’s number
To Next Page
Loading...
