Appendix G JUE-501/251 VPN setting
G-1
Appendix G JUE-501/251 VPN setting
JUE-501/JUE-251 supports IPsec VPN. JUE-501/JUE-251 Web Menu System allows user to set
parameters only for remote access. Others are provided as fixed value.
JUE-501/JUE-251 VPN specification is shown below.
Fig JUE-501/251 VPN Specification
Setting parameter Spec/Value
1) IPsec protocol mode ESP tunnel
(Network-to-Network VPN)
2) IPsec encryption mode 3DES(Triple DES)
AES(Advanced Encryption Standard)
3) IPsec authentication method HMAC_SHA1
HMAC_MD5
4) IPsec data compression mode Deflate
5) IKE(Internet Key Exchange) mode Main, Aggressive
6) IKE encryption mode 3DES
7) IKE Authentication Pre-Shared Key
8) Diffie-Hellman group Group 2 (1,024 bit)
9) NAT traversal Force (always enabled)
10) IKE retry interval 5[sec]
11) IKE retry number 5
12) IKE Phase1 timeout 20[sec]
13) IKE Phase2 timeout 20[sec]
14) IKE Lifetime 3600[sec]
15) IPsec Lifetime 3600[sec]
To Next Page
Loading...
Need help?
General
