Appendix J Multi-Voice Service
J-2
J.1 Settings for Simultaneous Voice Call
Settings for simultaneous voice call are made on Multi-Voice screen of Web menu. How to
use Web menu system is explained in [Sec.6 Web menu System].
To enter the Multi-Voice screen, open “Telephony” menu on the left [menu] panel and
select “Multi-Voice”. These settings require Admin privileges.
Setting Multi-Voice to “Enable” enables users to use several voice calls at the same time. A
maximum of nine Voice calls are available at the same time.
Display Contents
1) Multi-Vo i c e
Enable/Disable simultaneous voice call
System reboot is required to apply this setting.
2) APN
Access Point Name for Multi-Voice
3) SIP Domain Name
Session Initiation Protocol (SIP) domain name for Multi-Voice
4) SET Registers the settings.
Multi-Voice status icons (PS-Voice icon and Multi-Voice icon) will appear on Top panel of
Web menu when Multi-Voice service is enabled.
アイコン 説明
PS-Voice icon
Displays PS-Vo i ce service is in process.
（Displayed only when Multi-Vo i c e has been enabled.）
Multi-Vo i c e icon
Displays Multi-Voice service is available.
（Displayed only when Multi-Voice has been enabled.）
Multi-Vo i c e icon（not-available）
Displays Multi-Voice service is unavailable.
（Displayed only when Multi-Voice has been enabled.）
To Next Page
Loading...
Need help?
General
