JRC JUE-501 - Interworking Class; Mobility Management; Protocol Error (E.g., Unknown Message) Class

Appendix O Cause Code
O-2
Protocol error (e.g., unknown message) class
No. (HEX) Reason No. (HEX) Reason
0060 invalid mandatory information 0064 conditional IE error
0061
message type non-existent or not
implemented
0065 message not compatible with protocol state
0062
message type not compatible with
protocol state
0066 recovery on timer expiry
0063
information element non-existent or
not implemented
0067 protocol error, unspecified
Interworking class
No. (HEX)
Reason
No. (HEX)
Reason
007F Interworking, unspecified
Mobility Management
No. (HEX)
Reason
No. (HEX)
Reason
800B PLMN not allowed 8022 Service option temporally out of order
800C Location area not allowed 8026 Call cannot be identified
800D
Roaming not allowed in this
location area
8030-803F Retry upon entry into a new cell
800F No suitable cells in location area 805F Semantically incorrect message
8011 Network failure 8060 Invalid mandatory information
8014 MAC failure 8061
Message type non-existent or not
implemented
8015 Synch failure 8062 Message not compatible with protocol state
8016 Congestion 8063
Information element non-existent or
implemented
8017 GSM authentication unexpected 8064 Conditional IE error
8020 Service option not supported 8065 Message not compatible with protocol state
8021
Request service option not
subscribed
806F Protocol error, unspecified.