JRC JUE-501 - 5.1.15 Restricting Outgoing Call

5. How to use the telephone/FAX
5-28
5.1.15 Restricting Outgoing Call
Admin user can control originating a call from the terminal connecting to the port. This function can be
set by Web interface also (refer to [6.5.2.1 Set up Ports (p6-37)]).
Setting Function
Enable Originating a call is permitted.
Allowed Num
Originating a call only to the allowed
number (maximum 4) is permitted.
Phonebook
Originating a call only to the number
registered in phonebook is permitted.
Disable Originating a call is prohibited.
If this function is set to Disable, busy tone is heard when you Off-hook the Handset. Dialing is
unavailable.
To set the Out (Outgoing) Call “Enable” on Handset port:
Fig 5.1.15 Out Call setting method
APAC E143.5
14:03 UTC
READY
8 Alarmpack
9 Admin
READY
2 Telephony
3 Port
1 Telephony
2 PBX
Idle screen
Press MENU button.
Press CLR
button repeatedly
to return to Idle
screen.
Out Call setting screen
Select item and press OK button. If you
sele
ct AllowedNum, list of allowed
number will appear. You can edit it by
pressing MENU.
Handset menu screen
Select [3 Out Call] and press OK button.
Telephony menu screen
Select [1 Telephony] and press OK button.
Top menu screen
Select [9 Admin] and press OK button.
Admin menu screen
Select [2 Telephony] and press OK button.
1 Handset
2 TEL1
3 Out Call
4 In Call.
Enter the
Secret code.
Return to idle screen by pressing CLR
button several times or pressing
button once.
Telephony setting item selection menu screen
Select [1 Handset] and press OK button.
Enable
AllowedNum
Phonebook
Disable
1 Terminal
2 Telephony