JRC JUE-501 - Secondary SIM Setting

7. Handset Menu System
7-73
Chapter7 Handset Menu System
7.9.6.4 Secondary SIM setting MENU+ 9 +6+4）
In this menu, the use or non-use of Secondary SIM can be set. The Secondary SIM is used for remote
maintenance. System reboot is required to change setting.
1) Select [4 Secondary] at [SIM Menu screen] and press OK, and then select the setting for Secondary SIM.
“Enable” uses Secondary SIM instead of user’s SIM.
2) To enable the setting, reboot your system.
SIM Menu screen
Top menu screen
Secondary SIM setting screen
ＯＫ
Enable
Disable
ＯＫ
Rebooting
necessary!
ＯＫ
9 Admin
0 Service
5 Auto Dcn.
6 SIM
3 Facility
4 Secondary