JRC JUE-501 - Contents of WAN Profile Screen; Set WAN Profile (WAN Profile Screen)

6. Web Menu System
6-53
Chapter6 Web Menu System
6.5.5.1 Set WAN Profile (WAN Profile Screen)
To enter the WAN Profile screen, open “Network” menu on the left [menu] panel and select “WAN
Profile”.
On this screen, WAN Profiles up to five are defined.
WAN profile defines service type, settings of APN, Global IP Address, connection mode, WAN
filter, settings for VPN and secondary service type. WAN profile is used as a template for
regulating data connection on User Registration screen, Device Registration screen, Always
Activate screen and Remote Activate screen.
Select Profile
1) Select Profile
Select the profile to configure.
2) View
Displays the selected Profile.
Profile Setting
3) Group Name
Name of the profile
The name set here is displayed as profile name
on User
Registration screen, Device Registration screen, Always Activate
screen and Remote Activate screen.
4) Service Type Service type for data connection. Max rate is required when “Streaming
Only” or “Standard & Streaming” is selected.
5) Edit Whether this profile permits the assigned users to edit its APN settings
on Data Connection screen or not.
6) APN Access Point Name
7）
APN User/ Password User name and Password for APN.
The password will be hidden by ● when it entered.
Fig. 6.5.5.1a WAN Profile Screen
Table 6.5.5.1a Contents of WAN Profile Screen
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)