JRC JUE-501 User Manual

7. Handset Menu System
7-57
Chapter7 Handset Menu System
TOP menu screen
7.9.3.4 I/O setting (MENU+9+3+4+1~3)
In this menu, user can set input/output of ring acknowledgement/indication from/to the device connected
to the Junction Board.
1 Output 1
2 Output 2
1 Output
2 Input
3 Function
1 Control
2 Function
3 Polarity
Enable
Disable
Ring Ind.
Active High
Active Low
1 Input 1
2 Input 2
Ring Ack.
1 Ring Ind.
1 Type
Voice
Fax/Audio
UDI
RDI
Enable
Disable
“1 Output” sets output port.
“2 Input” sets input port.
“3 Function”
sets service
type to ring the output ports.
Select item and press
OK button.
Select setting port
and
press OK button.
Output port screen
“Function” is limited to
“Ring indication”
only in
current version.
P
ress OK button.
“1 Control” sets use or
non-use of the port.
“2 Function” sets the
action of the port.
“3 Polarity” sets the
condition to activate the port.
Select item and press OK
button.
“Voice” is 4 kbps Voice service.
“Fax/Audio” is 3.1 kHz Audio.
“UDI” is UDI service.
“RDI” is RDI service.
Select item and press OK button.
Press OK button.
“Enable” activates the port
and “Disable” inactivates
the port
. Select item and
press OK button.
Control menu screen
Output function screen
Output function is limited
to “Ring indication” only in
current version. Press OK
button.
Input function screen
Input function is limited to
“Ring Acknowledgement”
only in current version.
Press OK button.
Input port screen
Port menu screen
Select setting port and
press OK button.
Polarity menu screen
I/O menu screen
Function menu screen
Ring Ind. screen
Type selection screen
”Active High (Low)” operates
the function by the higher
(lower) of two voltages.
Select item and press OK
button.
Type activate screen
”Enable” operates ring
indication when the service
reached to the main unit
.
Select item and press OK
button.
Fig 7.9.3.4 Flow of I/O setting
OK
OK
OK
OK
OK
OK
OK
OK
* [UDI] and [RDI] menus are not
displayed for JUE-251.
8 Alarmpack
9 Admin
2 Telephony
3 Port
1 Handset
2 ISDN
3 Ethernet
4 I/O
5 Option
OK
OK
OK
OK
OK

JRC JUE-501 Specifications

General

Brand	JRC
Model	JUE-501
Category	Marine Equipment
Language	English