JRC JUE-501 User Manual

5. How to use the telephone/FAX
5-12
Admin menu screen
Select [3 Port] and press OK button.
Adjusting the voice volume and the backlight brightness by the buttons of Handset
Voice volume can be adjusted using the buttons on the left side of Handset (refer to [5.1.4
Adjusting voice volume and the backlight brightness](p5-10)).
To change the default voice volume, follow the way shown below.
Setting voice volume from Handset screen
Fig.5.1.5c Flow of setting voice volume
Setting backlight brightness (in Port Menu screen)
Fig.5.1.5d Flow of setting backlight brightness
Idle screen
Press MENU button.
Back light menu screen
Select the Brightness from four levels and press
OK button.
Then the screen is returned to previous one.
Handset menu screen
Select [1 Back Light] and press OK button.
Port menu screen
Select [1 Handset] and press OK button.
1 Handset
2 ISDN
1 Back Light
2 Dimmer
READY
4
…3
Voice Vol. setting screen
Select the type and press OK button.
The screen is returned to previous one.
APAC E143.5
14:03 UTC
READY
8 Alarmpack
9 Admin
READY
2 Telephony
3 Port
000m00s
Top menu screen
Select [9 Admin] and press OK button.
Port menu screen
Select [1 Handset] and press OK button.
Handset menu screen
Select [5 Voice Vol.] and press OK button.
1 Handset
2 ISDN
READY
4 Ring Vol.
5 Voice Vol.
3
2
1
Enter the
Secret code.
1 Terminal
2 Telephony

JRC JUE-501 Specifications

General

Brand	JRC
Model	JUE-501
Category	Marine Equipment
Language	English