6. Web Menu System
6-41
Chapter6 Web Menu System
Indicate Call Waiting
Select “Enable” for the service type for call waiting to be indicated, and then click Set button. The
call waiting indication tone is two beeps every three seconds. Refer to [5.1.8 Handling Call
Waiting (Handset)](p5-16) or [5.2.4 Handling Call Waiting (TEL port)](p5-35) for how to handle
call waiting.
Reject Incoming/Outgoing call
Select “Enable” for conditions for calls to be rejected. Beware that “Enable” makes the call reject.
To set call barring, Network PIN Code is required. Enter the PIN Code and click Set button.
Network PIN Code has no initial setting. The number (from 8 to 16 digits) which is input for the
first time shall be applied as the Network PIN Code. If forgot the Network PIN, changing Call
Barring settings will be disabled. Please do not forget the Network PIN Code.
To Next Page
Loading...
Need help?
General
