JRC JUE-501 - Change PIN Setting; Chg PIN Menu (Changing Procedure of PIN); PIN Changing Procedure

7. Handset Menu System
7-71
Chapter7 Handset Menu System
7.9.6.2 Change PIN setting MENU+ 9 +6+2）
In this menu, user can change the Personal Identification Number (PIN), which is necessary for SIM
card operation.
(To operate this menu, user should set PIN Input to [Enable] in [7.9.6.1 PIN Mode setting (p7-70)],
preliminarily.)
PIN changing procedure
1) Select [2 Change PIN] at [SIM Menu screen] and press OK, then SIM PIN input screen is displayed.
Input existed PIN (4-digit) and press OK (entered figures are hidden by ****).
2) New PIN input screen is displayed. Input new PIN and press OK.
3) New PIN retype screen is displayed. Retype new PIN again and press OK.
About releasing method of PIN locking (it occurs when the input error exceeds three times), refer to
[Releasing PIN locking and new PIN setting procedure (p7-71)].
Fig.7.9.6.2 Chg PIN menu (changing procedure of PIN)
9 Admin
0 Service
5 Auto Dcn.
6 SIM
New PIN?
New PIN input screen
****
1 PIN Mode
2 Change PIN
SIM PIN input screen
SIM PIN? 3
****
ＯＫ
ＯＫ
Retype PIN?
New PIN retype screen
****
ＯＫ
5
Auto Dcn.
6 SIM
ＯＫ
No limitation of input
error.
！
Error
PIN input limitation number
When [PIN Input] is set
to [Disable]
Returns to Admin Menu, even the
SIM PIN1 is incorrectly entered.
Error
ＯＫ
Input
Success
SIM Menu screen
Top menu screen
ＯＫ