JRC JUE-501 - 7.3 Satellite menu

7. Handset Menu System
7-21
Chapter7 Handset Menu System
7.3 Satellite menu ( MENU+ 3 )
In this menu, user can display the information of satellite including ocean region and spot beam No.
Fig. 7.3 Satellite menu screen
7.3.1 Satellite selection ( MENU+ 3 +1 )
In this menu, satellite can be changed. Currently selected satellite is denoted by “*”.
Select the preferred satellite and press OK button. The JUE-501/JUE-251 will search the most suitable
satellite if “Auto” is chosen.
* Although there is nothing wrong with JUE-501/JUE-251, selecting satellite makes some noise on ADE.
7.3.2 Spot Beam ID display ( MENU+ 3 +2)
In this menu, user can display the ID of Spot Beam.
Fig. 7.3.2 Spot Beam ID display screen
Satellite menu screen
1 Satellite
2 Spot Beam
3 Satellite
4 Phonebook
1 Satellite
2 Spot Beam
Top menu screen
Spot Beam:
9
3 Satellite
4 Phonebook
1 Satellite
2 Spot Beam
Spot Beam ID display screen
Press button
in any screen.
Satellite selection screen
Auto
*AMER W97.6
APAC E143.5
EMEA E25.1
OK
OK
OK
Fig. 7.3.1 Satellite selection screen
1 Status
2 SMS
3 Satellite
4 Phonebook
5 Redial
6 Internal
7 Call Log
8 Alarmpack
9 Admin
0 Service
Handset will display the suitable satellites
from the operating satellites.
AMER W97.6 (America satellite)
APAC E143.5 (APAC satellite)
EMAE E25.1 (EMEA satellite)