6. Web Menu System
6-25
Chapter6 Web Menu System
11) User For CS connection, the user is recognized by secret code. (Only when it was
inputted.)
For PS connection, the user is recognized by the login status.
12) Time/Byte Communication time
In Standard communications, data size is displayed.
In Standard communications, logs are saved every 10 M Byte.
13) Charge Estimated charge for the communication calculated by “Call Charge”
function.
14) Sat Number of using satellite
15) Code Cause code
Sorting call log
Step1: Click one of the column titles (No./ Start Time/ End Time/ Conn. Type/ Term/ Dir./ Called
No./APN/ User/ Time/Byte/ Charge/ Sat/ Code) to sort the call log.
The sort function is applied only to the displayed log.
(If the sort function would not work, refer to [Appendix N.11.When the call log
sort function is not working] (pN-12).)
Filtering call log
Filter conditions will appear on the top of the call-log list when “Filter” button (3) of table 6.4.5.1) is
clicked.
Enter the filtering condition and click “Execute filtering” button.
* Only Called No./APN term allows partial match.
Outputting procedure
Step1: Click “File” button
The Call Log is Displayed in the CSV text format on Web browser.
*If this function is executed by multiple PCs simultaneously, the file may be damaged. In this case,
obtain the file again.
* Follow the PC manual to save the data.
* Output file also reflects Filters explained in 3) of table 6.4.5.1 as well as the display.
Clearing procedure
Step1: Select the service type to delete from the pull-down menu.
Step2: Click “Delete” button.
Step3: Confirmation sentence will appear. Click “Yes ” button.
Call Logs are deleted.
To Next Page
Loading...
