JRC JUE-501 - 5.1.10 Rejecting Incoming;Outgoing call (call barring)

5. How to use the telephone/FAX
5-18
5.1.10 Rejecting Incoming/Outgoing call (call barring)
To reject Incoming/Outgoing call, you need to setup call barring function. It can be set by Web
interface also (refer to [6.5.2.3 Set Telephone Supplementary Service (p6-40)]).
Fig.5.1.10 Flow of setting Call Barring
MENU Meaning
AllOutCall Setting for All Outgoing Call.
OutExHC
Setting for Outgoing call Except
for Home Country.
AllInCall Setting for All Incoming Call.
InExHC
Setting for Incoming call Except
for Home Country.
APAC E143.5
14:03 UTC
READY
8 Alarmpack
9 Admin
READY
2 Telephony
3 Port
2 PBX
3 Suppl.
READY
Idle screen
Press MENU button.
Press CLR
button repeatedly
to return to Idle
screen.
Barring setting screen
Select [Enable/Disable] and press OK
button. (“Enable” denies the calls.)
Barring menu screen
Select service you want and press OK button.
Telephony menu screen
Select [3 Suppl.] and press OK button.
Top menu screen
Select [9 Admin] and press OK button.
Admin menu screen
Select [2 Telephony] and press OK button.
3 Waiting
4 Barring
Enter the
Secret code.
Return to idle screen by pressing CLR
button several times or pressing
button once.
Suppl. menu screen
Select [4 Barring] and press OK button.
1 Voice
2 Audio
1 AllOutCall
2 OutExHC
3 AllIncall
4 InExHC
Enable
Disable
Barring service menu screen
Select menu you want and press OK button.
1 Terminal
2 Telephony