5. How to use the Telephone/FAX
5-3
Chapter5 How to use the Telephone/FAX
Dial-up procedure for forced setting of service type
Just adding or on the head of dialing sequence, user can easily set the service type (Voice or
FAX) to each port, regardless of setup made at [6.5.2.1 Set up Port (p6-37)].
This is temporary setting, and available only for the transmission.
Only Voice service can be available on the Handset.
Table 5b. Dial-up procedure of the JUE-501/JUE-251, for forced setting of each service type
Using Voice service (4kbps Voice) temporarily
■ Regular calling 00 Country Code Area Code Subscriber’s number
■ Speed Dialing Speed Dialing number
■ Redial calling 00
■ Secret Code calling Secret Code 00 Country Code Area Code Subscriber’s number
Using FAX service (3.1kHz FAX) temporarily
■ Regular calling 00 Country Code Area Code Subscriber’s number
■ Speed Dialing Speed Dialing number
■ Redial calling 00
■ Secret Code calling Secret Code 00 Country Code Area Code Subscriber’s number
To Next Page
Loading...
