JRC JUE-501 - Appendix E Return to the factory default; Return JUE-501;JUE-251 to the factory default with following a) to c) bellow.

Appendix E Return to the factory default
E-1
Appendix E Return to the factory default
Return JUE-501/JUE-251 to the factory default with following a) to c) bellow.
a) Turn off JUE-501/JUE-251.
b) Turn on JUE-501/JUE-251 with reset button pressed. The reset button is on the back panel.
Press reset button with ball point pen, paperclip or something of that nature.
* Please do not press reset button forcefully. It may case a trouble.
c) Release the reset button after the Ready LED on front panel lit in orange.
* Returning to the factory default is also available on Web interface with Admin users. For more
information, refer to [Sec. 6.5.9 Reset to Factory Default (p6-80) ].
Reset button