JRC JUE-501 - Ether LED Setting; Panel LED Setting

7. Handset Menu System
7-43
Chapter7 Handset Menu System
7.9.1.7 Panel LED setting ( MENU+ 9 +1 +7)
In this menu, user with Admin authority can set ON/OFF of the LEDs on front panel of main unit.
Select [7 Panel LED] from [Terminal menu]. Then present setting is displayed on [Panel LED setting
screen].
To change the setting select ON or OFF by buttons and press OK .
7.9.1.8 Ether LED setting ( MENU+ 9 +1 +8)
User with Admin authority can set ON/OFF of the LEDs on Ethernet connector also.
Select [8 Ether LED] from [Terminal menu]. Then present setting is displayed on [Ether LED setting
screen].
To change the setting select ON or OFF by buttons and press OK .
8 A
larmpack
9 Admin
1 Terminal
2 Telephony
READY
8 Alarmpack
9 Admin
1 Terminal
2 Telephony
READY
6 WRF
7 Panel LED
Panel LED setting screen
Fig. 7.9.1.7 Panel LED Setting screen
OK
OK
ON
OFF
Terminal menu screen
7 Panel LED
8 Ether LED
Ether LED setting screen
Fig. 7.9.1.8 Ether LED Setting screen
OK
OK
ON
OFF
Terminal menu screen