JRC JUE-501 User Manual

4-11
Chapter4 Getting Started
4. Getting started
4.2.1 Mode setting of Guest and Admin
Guest user can perform the daily operation of the JUE-501/JUE-251.
Admin user can access additional functions like setup of the JUE-501/JUE-251 and information control.
When power switch is pressed only, the user logs in as a Guest user.
To operate the Admin user-limited menu described [5.1.5 Adjusting Handset], [6.5 Menus for Admin
Users (Web)] or [7.9Admin menu (Handset)] of this Manual, Log-in with secret code of Admin user is
required.
Fig. 4.2.1 Mode setting of Guest/Admin user
NOTE
* Return to Idle screen by pressing CLR button several times or pressing (On-hook) button
once to quit Admin user mode.
！
Error
Error screen
APAC E143.5
14:03 UTC
READY
1 Status
2 SMS
READY
8 Alarmpack
9 Admin
READY
Secret Code
？
OCEAN
Secret Code
？
****
READY
1 Terminal
2 Telephony
Admin menu screen
This screen is displayed soon, when the secret code
is authenticated.
You have free access to Admin menu after this
screen is displayed.
Idle screen
Press MENU button, then TOP menu opens.
Secret code setting screen
Enter 4-digit Secret code. The entered characters are
hidden by ****.
TOP menu screen
Press button to move the cursor, and select [9 Admin].
Then press OK button.
Error screen
This message is displayed soon after the secret code is entered wrongly,
and the screen returns to Top menu.
NOTE
Initial secret code of Admin is “0001”.

JRC JUE-501 Specifications

General

Brand	JRC
Model	JUE-501
Category	Marine Equipment
Language	English