JRC JUE-501 User Manual

6. Web Menu System
6-26
6.4.5.2 Set Call Charge Rate (Call Charge Screen)
To enter the Call Charge screen, open “Call Log” menu on the left [menu] panel and select “Call
Charge”.
JUE-501/JUE-251 calculates the communication charge automatically from the list of “Rate for Unit”
when it is filed by user. The calculated charge is displayed in Call Log.
Procedure of setting Call Charge
Step 1: Select the Currency from the pull down menu. The menu contains USD, EUR a n d J P Y.
Step 2: Click the Set button located to the right side of the Currency.
Step 3: Enter the charge for at a rate per unit time (minute), size (Mbyte) and mail.
Step 4: Register the settings by clicking Set button below.
NOTE
* This calculation is only a rough estimation based on user input.
* JRC does not take any responsibility for the correctness of the estimated charge.
* Settings for UDI, RDI and 256k Streaming are not displayed for JUE-251 because FB250 system
doesn’t support these services.
* Only Admin users can change these settings.
Step 1
Step 2
Step 3
Step 4
Fig. 6.4.5.2 Call Charge Screen

JRC JUE-501 Specifications

General

Brand	JRC
Model	JUE-501
Category	Marine Equipment
Language	English