JRC JUE-501 - PIN Input Setting Procedure; PIN Mode Menu; PIN Mode Setting

7. Handset Menu System
7-69
Chapter7 Handset Menu System
OK
7.9.6.1 PIN Mode setting （ MENU+ 9 +6+1）
In this menu, Enable/Disable of PIN entry can be set.
Setting [Enable], PIN entry is required when turning OFF/ON of the power source.
Setting [Disable], PIN entry is not required when turning OFF/ON of the power source.
Set [Enable] prior to changing the PIN at next subsection [7.9.6.2 Change PIN setting (p7-72)]
PIN Input setting procedure
1) Select [1 PIN Mode] and press OK, then PIN Input setting screen is displayed. Select Enable or Disable
of PIN entry, and press OK.
2) SIM PIN input screen is displayed. Input exist PIN (4-digit) and then press OK.
About releasing method of PIN locking (it occurs when the input error exceeds three times), refer to
[Releasing PIN locking and new PIN setting procedure (p7-71)].
PIN Input setting procedure
Fig. 7.9.6.1a PIN Mode menu
9 Admin
0 SERVICE
5 Auto Dcn.
6 SIM
1 PIN Mode
2 Ch
ange PIN
Enable
Disable
PIN Input setting screen
SIM Menu screen
ＯＫ
ＯＫ
SIM PIN? 3
SIM PIN input screen
****
Remaining number
before PIN lock
Error
Returns to SIM Menu, even the SIM PIN
is incorrectly entered.
Input is
succeeded
Top menu screen