Appendix H How to connect PPPoE Connection
H-12
The PPPoE Server Name of JUE-251/501 and AT command can be specified in Service name.
The Server Name is used to choose the terminal connected from PC when two terminals, JUE-251/501,
are equipped and connected with the same LAN. The default of Server Name is “JUE-251” (For
JUE-251), “JUE-501” (For JUE-501), but it can be changed by PPPoE server setting menu (Section
6.5.5.10).
The AT command can be inputted AT+CGDCONT, AT+CGEQREQ and AT+CGEQMIN. Please refer
to another document “AT COMMAND” (document number: 7ZPSC0500) enclosed to CD-ROM for
the details of AT command specification.
The specification formats for Server Name and AT command are as follows:
Only Server Name:
(Server Name)¥
Only AT command:
(AT command 1);(AT command2);(AT command3)
Server Name and AT command:
(Server Name)¥(AT command 1);(AT command2);(AT command3)
Table H.5. Example of PPPoE connection option
Purpose String of Service Name
Connect Standard IP via JUE-251
(Use WAN Profile for GUEST user)
JUE-251¥
Connect Standard IP with APN AT+CGDCONT=1,"IP","bgan.inmarsat.com",,0,0,,,
Connect Standard IP specified with APN,
User name and Password via JUE-501
JUE-501¥AT+CGDCONT=1,"IP","bgan.inmarsat.com
",,0,0,"User","Pass",
Connect Streaming IP specified with APN
via JUE-251
JUE-251¥AT+CGDCONT=1,"IP","bgan.inmarsat.
com",,0,0,,,;+CGEQREQ=1,1,128,128,128,128;+
CGEQMIN=1,1,128,128,128,128
This page is remained as a blank.
To Next Page
Loading...
