6. Web Menu System
6-63
Chapter6 Web Menu System
Change the view range of the packet filter
Step 1: Input the minimum ID number you want to view to the “Start” box.
Step 2: Input the maximum ID number you want to view to the “End” box.
Step 3: Click “Disp” button, and the list of ranges you inputted is displayed.
Add new packet filter / Change existing packet filter
Step 1: Input the filter rule to the text boxes.
Step 2: Click “Set” button in the same line.
Delete a existing packet filter
Step 1: Select “Disable” to the “Protocol No.” and click “Set” button in the same line.
Setting of packet filters are applied immediately after the “Set” button is clicked.
To Next Page
Loading...
