JRC JUE-501 - H.4.2 Disconnect PPPoE

Appendix H How to connect PPPoE Connection
H-10
(3) [Connecting] dialog appears and JUE-501/JUE-251 starts Standard IP connection through PPPoE.
Fig.H.4.1.3 Connecting Dialog
(4) An information message will be displayed on the task tray after the connection has been
established.
Fig.H.4.1.4 Connected Dialog
H.4.2 Disconnect PPPoE
(1) Make a right-click on your PPPoE-connection-icon, and select [Disconnect]. And then, the PPPoE
connection will be disconnected.
Fig.18 Disconnect Dialog