JRC JUE-501 User Manual

6. Web Menu System
6-37
Chapter6 Web Menu System
6.5.2 Telephony Menu
Telephony menu is on the left [menu] panel.
In this menu, user can set up telephony.
Telephony Menu contains following screens.
・ Telephony Screen （Sec. 6.5.2.1 Set up Ports）
・ PBX Screen （Sec. 6.5.2.2 Set Auto Answering the Telephone）
・ Supplementary Screen （Sec. 6.5.2.3 Set Telephone Supplementary Service）
6.5.2.1 Set up Ports (Telephony Screen)
To enter the Telephony screen, open “Telephony” menu on the left [menu] panel and select
“Telephony”.
User can set Outgoing/Incoming service type, operation limit, voice volume, limitation for outgoing
call and call up time for each port (Handset/ TEL1~6/ ISDN).
Display Contents
1) Port Setting Port
2) Outgoing/Incoming
Type
Outgoing/Incoming type
Each pull down menu contains available type for the port.
“Voice” sets type to 4k AMBE service.
“Fax” sets type to Fax.
“Audio” sets type to 3.1 kHz Audio service.
Fig. 6.5.2.1a Terminal Screen
Table. 6.5.2.1a Contents of Terminal-Setting
1)
2)
3)
4)
5)
6)
5)
7)

JRC JUE-501 Specifications

General

Brand	JRC
Model	JUE-501
Category	Marine Equipment
Language	English