EasyManua.ls Logo

JRC JUE-501 - Alarmpack MDM Part

JRC JUE-501
406 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Web Menu System
6-31
Chapter6 Web Menu System
RNC ID Satellite Station ID 0x00-0xFF
4 Tracking: Satellite tracking type
(Auto, Auto(Gyro): Signal
Tracking, Other: Gyro)
Auto,Auto(Gyro),Sync/Step,
LAN,NMEA(4.8k),
NMEA(38.4k)
NSKDIPSW: NSK Unit Dip-SW XX (00 ~ FF )
CableLoss: ADE-BDE Cable loss
0.050.0
CalibErr: Calibration Error Code 0~255
UpdateErr: Updating result 0
(fixed to 0 for JUE-501/251)
5 RX Mode: Receiving Channel type T025Q / T1Q / T1X / T45X
ATT: BDE attenuator value 0~255
IMSI: IMSI value stored in SIM card 123456789012345
6 BZ: Buzzer Connection status
(
0:Not connected, 1:Connected)
nnnn
( BZ1 is first from left )
BTN: Button Connection status
(
0:Not connected, 1:Connected)
nnnn
( BTN1 is first from left )
LAN: Ethernet Link status
(
0:Not connected, 1:Connected)
nnnnnn
( User LAN1 is first from left )
Tick: The timer since system boot 0xnnnnnnnn
3. MDM part
Line Display Contents Displayed style
1 MDM-ALM: Existence of Modem alarm None or objective part
C/No: Carrier / Noise ratio 40.0~67.0
RxChIdx: Receiving channel index 0, 6400~39280
RxBr: Receiving Bearer 0~3
RxOffset: Receiving frequency offset 0 or 1
2 BDE Temp: BDE Temperature -125~+125
HALAcqSts: HAL Acquisition Status 0~6
Fig. 6.4.6.1d Alarmpack MDM part
Table 6.4.6.1d Contents of Alarmpack MDM part

Table of Contents

Related product manuals