JRC JUE-501 User Manual

6. Web Menu System
6-66
6.5.5.4 Establishes Remote Connection (Remote Activate Screen)
To enter the Remote Activate screen, open “Network” menu on the left [menu] panel and select
“Remote Activate”.
The settings of “Remote Activate” can be executed on this screen. Anyone who knows user name and
password registered here can establish Standard IP connection by sending SMS when “Remote
Activate” is set to “Enable”. The connection connected by SMS can be also disconnected by SMS.
Display Contents
1) Remote Activate
Enable/Disable Remote Activate
1)
2)
3)
4)
5)
6)
7)
Fig. 6.5.5.4 Remote Activate Screen
Table 6.5.5.4 Contents of Remote Activate Screen
NOTE
• There is a possibility to get unexpected communication fee charged by sending and
receiving unexpected packet through the connection. Thus be careful to block an
unexpected packet by using Packet filter and modifying settings of the terminal etc.
• JRC is indemnified for any communication fee troubles using this function except as
outlined in the product warranty and by limitation of law.
• Distribution partner of SIM card might charge a communication fee by only connecting
and disconnecting Standard IP Connection.
• This function does not work when the selected profile doesn’t support Standard IP
connection as its service type.
• The Standard IP connection connected by this function will be disconnected by Auto
disconnect function if Auto disconnect function is activated.
• Do not overlap IP address range setting of this function with Packet Detection Activate
function or Always Activate function.
• This function is case-sensitive.
• This function connects only primary connection and does not connect secondary
connection automatically.

JRC JUE-501 Specifications

General

Brand	JRC
Model	JUE-501
Category	Marine Equipment
Language	English