4-4
4.1.2 Setting/removing SIM card
Please make sure that SIM card is inserted correctly before turning on the power every time.
Do not set/remove the SIM card during power switch is turned on.
SIM card setting procedure (Before power switch is turned on)
1)
Remove the SIM card protector by unscrewing cross-head screws on front
panel.
2) Insert your SIM card with the metal side down. Push it in until you
hear the SIM card slot make a click sound.
3) Fasten the SIM card by sliding the black knob.
4) Restore the SIM card protector by driving the screws in.
NOTE
・ JUE-501/JUE-251 will not work without a valid SIM
card, which is furnished from the
Distribution Partner.
・ Make sure that power switch is correctly turned off, before you set/remove the SIM card
To Next Page
Loading...
