xii
Before using, read this instruction manual.
Incorrect operation may cause improper working operation or malfunction.
When a fault has been detected, refer to the “Appendix N. Trouble shooting and
FAQ”. If it is not improved, turn OFF and ON the power switch of main unit to
reboot. Still it persists, stop operation and contact the dealer you purchased from.
<<Above Deck Equipment>>
Do not deliver mechanical shock and/or force, because each unit of your ADE is a
precision instrument. Unwanted shock and force may cause malfunction.
Do not paint the radome. Painting of the radome may cause a decrease of the
communication quality.
<<Below Deck Equipment>>
Do not mount the Handset near CRT device or other devices; otherwise
performance of the devices may be affected by the Handset’s magnetic field.
Do not set/remove the SIM card during power switch is turned on.
It may cause malfunction.
Do not set/remove the ADE-BDE cable during power switch is turned on.
It may cause malfunction.
Do not remove the power supply cable before the power source disconnecting
process is completed. It may cause malfunction.
<<Coaxial Cable and the other cables>>
Take care not to damage the connectors and the corrosion resistant sheath of
cable. Otherwise, a trouble may occur.
Do not pull the cable by gripping connector plug only.
Otherwise, a trouble may occur.
To Next Page
Loading...
Need help?
General
