Korg NAUTILUS Series Parameter Guide

PROGRAM mode: HD-1
100
OSC2 Send1 (to MFX1) [000…127]
OSC2 Send2 (to MFX2) [000…127]
Sets the volume (send level) at which the output of OSC2
will be sent to master effects 1 and 2. These parameters will
be valid when Oscillator Mode is set to Double and Bus
Select is set to L/R or Off.
CC#93 scales OSC 1/2’s Send 1 level, and CC#91 scales
the Send 2 level. These are controlled on the global MIDI
Channel (GLOBAL 1–1a). The actual send level is
determined by multiplying these values with the send
levels of each oscillator.
v 8–1: Page Menu Commands
• Compare →p.112
• Write Program →p.112
• Exclusive Solo →p.113
• Copy Insert Effect →p.122
• Swap Insert Effect →p.122
•PAGE →p.126
•MODE →p.126

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)