Korg NAUTILUS Series

PROGRAM mode: HD-1
118
Automatically-set parameters and their values
- : Not set automatically
[ ]: automatically set according to the settings of the
parameter in the dialog box
*1 [ ] User Global Setting: Edit Program Parameters
[x] User Global Setting: Edit Global Parameters
*2 The input source specified in “Source Audio” will be set.
*3 If “Source Audio” is Mono-L this will be L-Mono, if
Mono-R this will be R-Mono, and if Stereo this will be
Stereo.
*4 When “Save to” RAM.
*5 When “Save to” RAM, and “Convert to Program” is
checked.
Copy Tone Adjust
Copy Tone Adjust is available when CONTROL ASSIGN
is set to Tone Adj ust.
This command replaces the current Tone Adjust settings
with those of any other Program, Combination Timbre, or
Song Track.
1. Select “Copy Tone Adjust” to open the dialog box.
2. Use “From” to select the copy-source mode, bank, and
number.
3. In the Timbre field (if you’ve selected a Combination)
or Track field (if you’ve selected a Song), select the
Timbre or Track to copy from.
Initialize
Resample Program
(Combination) Play
REC Audio Input
Input (Input Source)
*1
Input1, 2, USB 1, 2 Input1, 2, USB 1, 2 [Source Audio]
*2
Input 1, USB 1
Bus Select Off Off Off
FX Ctrl Bus Off Off Off
REC Bus Off Off 1/2
Send1/2 000 000 000
Pan L000 L000 L000
Level 127 127 127
Input 2, USB 2,
Bus Select Off Off Off
FX Ctrl Bus Off Off Off
REC Bus Off Off 1/2
Send1/2 000 000 000
Pan R127 R127 R127
Level 127 127 127
Sampling Setup
(Name)
Source Bus L/R L/R REC1/2
Source Direct Solo (N/A) (N/A) Off
Trigger Note On Note On Sampling START Button
Metronome Precount (N/A) (N/A) –
Save to RAM [Save to] [Save to]
Mode Stereo Stereo [Source Audio]
*3
Rec Level +0.0 +0.0 +0.0
Select Sample
Auto +12dB On On On
*4
On
*4
Convert to Program Off [Convert to Program]
*5
[Convert to Program]
*5
Program – [Program]
*5
[Program]
*5
MS – (create new)
*5
(create new)
*5
Original Key – (C2)
*5
(C2)
*5
Select Directory/File for
Sample To Disk
– – – –