Korg NAUTILUS Series

EXi: STR-1 Plucked String
238
Intensity [–99…+99]
This controls the depth and direction of the Intensity Mod
AMS.
5–2c: Manual 1
These parameters let you create your own mix of the filters.
When Mode 1 is set to Manual 1, it will use these settings.
You may wonder why Band Reject is not included here. This
is because it’s not a filter mode per se. Instead, it’s created by
an equal combination of High Pass and Low Pass. Try it and
see!
Lowpass [–99…+99]
This controls the volume of the Lowpass filter output.
Negative values invert the phase.
Highpass [–99…+99]
This sets the volume of the Highpass filter output.
Bandpass [–99…+99]
This controls the volume of the Bandpass filter output.
Dry [–99…+99]
This sets the volume of the dry signal.
5–2d: Manual 2
The Manual 2 parameters are identical to those of Manual 1,
as described above.
v 5–2: Page Menu Commands
• Compare →p.112
• Write Program →p.112
• Exclusive Solo →p.113
•PAGE →p.126
•MODE →p.126