Korg NAUTILUS Series Parameter Guide

COMBINATION mode
414
Enable JS–Y [Off, On]
Specifies whether MIDI CC#02 (the –Y axis of the
NAUTILUS’s joystick setting) will be transmitted and
received.
Enable Ribbon [Off, On]
Specifies whether or not MIDI CC#16 will be transmitted or
received.
Note: MIDI CC#16 can also be transmitted and received by
assigning each MIDI CC# to the RT control knobs or foot
pedal. For more information, please see “Controller
Assignments” on page 913.
Timbres 02…16
These are the MIDI Filter1 settings for timbres 2 through 16.
They are the same as for timbre 1. See “Timbre 01”.
v 3–1: Page Menu Commands
• Compare →p.112
• Write Combination →p.433
• Exclusive Solo →p.113
• Copy From Program →p.433
•PAGE →p.126
•MODE →p.126

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)