Korg NAUTILUS Series Parameter Guide

SEQUENCER > Home 0–1: Mixer
449
If Track Select is AUDIO1–8 or AUDIO9–16:
Here you can make settings for recording and playback of
audio tracks in the song. You can specify the audio source
for recording, and change the Play/Mute status, Solo status,
pan, and volume for playback.
0–1b: Status Play/Mute
Selected Track Info
This displays information about the currently selected MIDI
or audio track. For more information, see “0–1b: Status
Play/Mute” on page 446.
Track 01 (Track Number)
This indicates the audio track number. The parameters below
this track number are the settings for that track.
REC Source [(Stereo Pair Off): Audio Input1…2,
USB1…2, L, R, REC1…4, Indiv.1…4]
[(Stereo Pair On): Audio Input1/2,
USB 1/2, REC1/2…3/4, Indiv.1/2…3/4]
This selects the source that will be recorded on the track. The
signal of the bus line you specify here will be recorded.
The available settings depend on whether or not Stereo Pair
is enabled for the track.
0–1a
0–1b
0–1PMC
0–1a
0–1c
0–1PMC

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)