SEQUENCER mode
470
When Equal Amount is Off, the individual Track Center
Vol ume parameters determine the way in which X-Y
position affects volume.
Note: For an interesting variation on this effect, turn Equal
Amount Off, and instead set all of the Track Center
Volumes to 50%. The Tracks will still fade together
smoothly, but with a more gentle effect towards the extremes
of the Vector axes.
Vector Synthesis system, SEQUENCER mode
Song X-Y CC Control
X-Y Control
Song
X-Y Envelope
X-Y X and Y modes
Song switch:
Enable CC control
X+/- and Y+/-
CC Assignments
X-Y CC Modulation of
Program and FX Parameters
(Global Channel Only)
Song X-Y Volume Control
Song switch:
Enable Volume control
X-Y Modulation of
Track Volume
Track 1-16 Center Volume
and Equal Power settings
X-Y Control
MIDI In
(Global Chan.)
X-Y CC MIDI Output
Song
Global switch:
X-Y MIDI Out
X-Y Control
X-Y CC Control
X-Y CC MIDI Output
Global Controllers
MIDI CC Assignments
Defaults: X=118, Y=119
Program
X-Y Envelope
X-Y Control
MIDI In
(Track Chan.)
Track 1
Track 16
X-Y control on the display applies only when the Track
is on the same MIDI Channel as the Keyboard Track.
X-Y control on the display applies only when the
Keyboard Track is on the Global Channel.
+
+
Program switch:
Enable Volume control
X-Y Modulation of
Osc 1-2 Volume
Osc 1-2 Center Volume
and Equal Power settings
Program X-Y Volume Control
X-Y X and Y modes
Program switch:
Enable CC control
X+/- and Y+/-
CC Assignments
X-Y CC Modulation of
Program Parameters
Program X-Y CC Control
To Next Page
Loading...
Need help?
General
