SEQUENCER mode
494
Bottom Slope [00, 01, 02, 03, 04, 06, 08, 10,
12, 18, 24, 30, 36, 48, 60, 72]
Specifies the range of keys (12 is one octave) over which the
volume will be reached starting from the bottom key.
0: The volume will be at the original level from the bottom
key.
12: The volume will increase gradually as you play upward,
and will reach the original volume one octave above the
bottom key.
72: The volume will increase gradually as you play upward,
and will reach the original volume six octaves above the
bottom key.
Bottom Key [C–1…G9]
Specifies the bottom key (lower limit) of the notes that will
sound each MIDI track.
Top K e y and Bottom Key settings can also be input by
holding down the ENTER button and playing a note on the
keyboard.
It is not possible to set the bottom key above the top key
of the same track. Nor is it possible for the top and
bottom slopes to overlap.
Track 02…16 (Track Number)
These are the key zone settings for MIDI tracks 2 through
16. They are the same as for track 1. See “Track 01”:.
v
3–5: Page Menu Commands
• Compare →p.112
• Memory Status →p.521
• Exclusive Solo →p.113
• Rename Song →p.521
• Initialize Song →p.522
• Copy From Song →p.522
• Load Template Song →p.522
• Save Template Song →p.523
• FF/REW Speed →p.523
• Set Location (for Locate Key) →p.523
• GM Initialize →p.523
• Copy from Combi →p.525
• Copy From Program →p.525
•PAGE →p.126
•MODE →p.126
Bottom Key Top Key
Key
Volume
Bottom Slope
Top Slope
How volume will change according to keyboard location
To Next Page
Loading...
Need help?
General
