SEQUENCER mode
540
3. Use “From” to select the bounce-source track, and
“To” to select the bounce-destination track.
(By default, the track you choose in Track Select will be
specified for “From”.)
4. Press the OK button to execute the command. If you
decide not to execute, press the Cancel button.
In the case of “Bounce Track,” the bounce-source track
data will be set to “zero”.
Erase Measure
This command erases the specified type(s) of musical data
from the specified range of measures. The Erase Measure
command can also be used to remove only a specific type of
data. Unlike the Delete Measure command, executing the
Erase Measure command does not cause the subsequent
measures of musical data to be moved forward.
1. Use Track Select to select the MIDI track (MIDI
Track 01–16) master track or audio track (Audio
Track 01–16), that contains the measures of data you
want to erase.
2. Select “Erase Measure” to open the dialog box.
MIDI tracks
Audio tracks
3. In From Measure select the first measure to be erased,
and in To End of Measure select the last measure to be
erased.
(By default, From Measure and To End of Measure will
be set to the range that you specified in the Track Edit
page.)
4. Use “Kind” to select the type of data you want to
erase.
MIDI data:
All: Erases all types of data in that track, including note
data.
Control Change: Erases control change data.
After Touch: Erases both channel pressure and poly key
pressure data.
Pitch Bend: Erases pitch bend data.
Program Change: Erases program change data.
Exclusive: Erases exclusive data.
Audio data:
All: Erase all data from that track.
Audio Event: Erase audio events.
Automation Event: Erase all automation events (EQ,
Send 1/2, Pan, Volume).
EQ: Erase only EQ data (Bypass, Input Trim, High Gain,
Mid Cutoff, Mid Gain, Low Gain).
Send 1/2: Erase only Send 1 and Send 2 data.
Pan: Erase only pan data.
Volume: Erase only volume data.
5. Select the track(s) for which you want to execute the
command.
If you execute with All Tracks, All MIDI Tracks, and
All Audio Tracks unchecked, the specified “Kind” of
data will be erased only from the track that’s selected in
Track Select.
If you check All Tracks, the specified “Kind” of data will
be erased from all tracks.
If you check All MIDI Tracks (when a MIDI Track is
selected), the specified “Kind” of data will be erased
from all MIDI tracks (MIDI Tracks 01–16).
If you check All Audio Tracks (when an Audio Track is
selected), the specified “Kind” of data will be erased
from all audio tracks (Audio Tracks 01–16).
6. To execute the Erase Measure command, press the
OK button. To cancel, press the Cancel button.
If data extends across the boundary between a measure
being erased and a measure that is not being erased, only
the portion that falls within the specified region will be
erased.
Be aware that if note data extends across several
measures, and you erase a measure that falls in the middle
of the note, that note data will disappear from the
subsequent measures
as well.
Note: Note data can also be erased using the “Shift/Erase
Note” menu command. Use this command when you wish to
erase a specific range of notes, or to erase notes from a
specific Beat.Tick.
Note: Control Change data can also be erased using the
“Erase Control Data” menu command. Use this when you
wish to erase a specific type of control change, or to erase
control change data from a specific Beat.Tick range.
If you erase a portion of an audio event that extends
across several measures, a new region that changes the
region of the WAVE file that is played back will
automatically be created and named.
Note: The WAVE file will not be deleted.
21 543
No data
21 543
Before Erase
After Erase
Example: If measures 2–3 are erased, measures 2–3 will be blank.
To Next Page
Loading...
Need help?
General
