Command Reference
R&S
®
ZNB/ZNBT
1062User Manual 1173.9163.02 ─ 55
Internal and external mass storage
The mass storage of the analyzer can be internal or external. The internal mass stor-
age location is either the public folder or the instrument folder of the internal hard disk
(C:\Users\Public or C:\Users\Instrument, see below). The external mass
storage device can be a USB memory stick connected to one of the USB ports (map-
ped to any free drive letter) or a network connection.
File and directory names
The parameters for file names and directory names are strings. Some commands use
a fixed "working" directory. For others, the file name parameter must contain the abso-
lute path including the drive name and all subdirectories. If the specified path is not
absolute, the file location is interpreted relative to the current directory (queried with
MMEMory:CDIRectory). The file name itself can contain the period as a separator for
extensions.
File and directory names can be chosen according to Windows
®
conventions. All let-
ters and numbers are allowed, plus the special characters "_", "^", "$", "~", "!", "#", "%",
"&", "-", "{", "}", "(", ")", "@" and "`". Reserved file names are CON, AUX, COM1, ...,
COM4, LPT1, ..., LPT3, NUL and PRN. The use of wildcards ? and * is not allowed.
Public folders in Windows
®
and default file locations
To achieve maximum system security, most of the folders on the internal hard disk are
read-only folders. Only the following folders can be changed:
●
C:\Users\Public
●
C:\Users\Instrument
The public and instrument folders can be used to store user data. To simplify this task,
the public folder contains predefined subfolders; e.g. the subfolder
C:\Users\Public\Documents\Rohde-Schwarz\Vna\Calibration\Kits is
intended for calibration kit data. The subfolder structure is similar to R&S ZVA/B instru-
ments, however, the R&S ZVA/B default path C:\Rohde&Schwarz\Nwa is replaced
by C:\Users\Public\Documents\Rohde-Schwarz\Vna..
MMEMory:AKAL:FACTory:CONVersion.......................................................................... 1064
MMEMory:AKAL:USER:CONVersion..............................................................................1064
MMEMory:CATalog?.....................................................................................................1065
MMEMory:CATalog:ALL?.............................................................................................. 1065
MMEMory:CDIRectory..................................................................................................1066
MMEMory:CKIT:INFO?................................................................................................. 1066
MMEMory:COPY......................................................................................................... 1067
MMEMory:DATA.......................................................................................................... 1067
MMEMory:DELete........................................................................................................1067
MMEMory:DELete:CORRection.....................................................................................1068
MMEMory:FAVorite<FavId>...........................................................................................1068
MMEMory:LOAD:CABLe...............................................................................................1069
MMEMory:LOAD:CKIT................................................................................................. 1069
MMEMory:LOAD:CKIT:SDATa....................................................................................... 1069
MMEMory:LOAD:CKIT:SDATa:WLABel...........................................................................1071
MMEMory:LOAD:CKIT:UDIRectory................................................................................ 1072
SCPI Command Reference
To Next Page
Loading...
