REPLACEMENT AND ADJUSTMENT
SM 23 B830
Finisher
B830
6. Remove the drag roller motor unit [A] (Bearing x1, x2, = x1)
7. Remove the drag roller motor ( x2)
8. Remove the drag roller HP sensor unit [B] ( x1)
9. Remove the drag roller HP sensor ( x1, Pawls x3)
10. Remove the paper height sensor – shift/Z-fold unit [C] ( x2, = x2)
11. Remove the paper height sensor shift/Z-fold ( x1, Pawls x3)
12. Remove the drag drive motor unit (= x4, x2)
13. Remove the drag drive motor (x2)
B830R992.BMP
[A]
[B]
To Next Page
Loading...
