Ricoh B234 - General Operation; Original Inversion and Feed-Out

ADF
B234/B235/B236/D101/D102/D103 6-26 SM
6.6.9 ORIGINAL INVERSION AND FEED-OUT
General Operation
When the scanner reaches the return position, the copier CPU sends the feed-out
signal to the ADF. When the ADF receives the feed-out signal, the transport belt
motor and feed-out motor [A] turn on. The original is then fed out to the exit tray or
fed back to the exposure glass after reversing in the inverter section.
This ADF has two exit trays. For single-sided original mode, the original is fed out
straight out to the right exit tray, but for double-sided original mode, the original is
fed out to the upper exit tray.
This causes the originals to be fed out in the correct order on the exit trays and
allows the maximum one-to-one copy speed for each mode.
B234D924.WMF
[A]