ADF
SM 6-27 B234/B235/B236/D101/D102/D103
Detailed
Descriptions
Original Inversion
When the ADF receives the original invert signal from the copier, the transport belt
motor, feed-out motor, exit gate solenoid [A], and inverter gate solenoid [B] turn on
and the original is fed back to the exposure glass through the inverter roller [C], exit
gate [D], inverter guide roller [E], inverter gate [F], and inverter roller.
The transport belt motor reverses shortly after the leading edge of the original turns
on the inverter sensor [G], and feeds the original to the left scale.
B234D925.WMF
[C]
[A]
[B]
[F]
[G]
[D]
[E]
To Next Page
Loading...
